How To Instal Acid Music Studio 10 For Mac Free
Download the free ACID Music Studio trial version and try loop-based music production for yourself. 3,000 ACID loops and 90 virtual instruments create the base for creative music arrangements. Current features including real-time pitch/tempo transposition, unlimited tracks, and our signature pick/paint/play interface all make the ACID Music. We combine the Acid Music Studio 10 Loops economic and environmental benefits of downloadable software with our large purchasing power to get our prices as low as possible. It is our mission to pass this value on to our customers, so you can Acid Music Studio 10 Loops always expect low prices from us.
How To Instal Acid Music Studio 10 For Mac Os
I've got Music Studio 9 on Windows 7 platform and a Behringer X1204USB mixer. You can record audio from the mixer in two ways.
1. Connect a patch cable from the main outputs to the 1/8 inch stereo mic input on your computer's sound board. Alternately, rather than the mains output, you can use the headphone jack on the mixer if your model has one.
2. Use the USB interface to transfer the signals. You will have to go to Behringer's website and download the USB driver. You will have to set it as the input device in Windows.
Keep in mind, you will have to set your tracks getting input for either 1 or 2 above and also either 'left' or 'right'. If you are recording 2 channels (stereo) simultaneously, don't forget to change the 'Pan' control for the 2 tracks so that you route 'left' and 'right' to the correct tracks.
NOTE: You can theoretically record 4 tracks simultaneously using a combination of both 1 and 2. However, when I tried doing that in my system, I got a high pitched buzz superimposed on all waveforms. When I contacted Behringer about that issue, I was told by a company sound engineer that by trying to bring inputs in from both the mic jack and the USB at the same time I have set up a 'virtual machine' that was causing the problem. Not sure what the heck a virtual machine is in this context.
Good luck!
1. Connect a patch cable from the main outputs to the 1/8 inch stereo mic input on your computer's sound board. Alternately, rather than the mains output, you can use the headphone jack on the mixer if your model has one.
2. Use the USB interface to transfer the signals. You will have to go to Behringer's website and download the USB driver. You will have to set it as the input device in Windows.
Keep in mind, you will have to set your tracks getting input for either 1 or 2 above and also either 'left' or 'right'. If you are recording 2 channels (stereo) simultaneously, don't forget to change the 'Pan' control for the 2 tracks so that you route 'left' and 'right' to the correct tracks.
NOTE: You can theoretically record 4 tracks simultaneously using a combination of both 1 and 2. However, when I tried doing that in my system, I got a high pitched buzz superimposed on all waveforms. When I contacted Behringer about that issue, I was told by a company sound engineer that by trying to bring inputs in from both the mic jack and the USB at the same time I have set up a 'virtual machine' that was causing the problem. Not sure what the heck a virtual machine is in this context.
Good luck!